The SE Vans Big Ripper 29″ BMX Freestyle Bike-Plume is the awesome result of Vans and SE getting together and designing a limited edition, individually numbered run of Bike Life’s iconic Big Ripper. No other bike embodies the ethos of Bike Life quite like the Big Ripper, and here we have a Big Ripper done up in eye grabbing colors, with bespoke Vans check pads. Featuring a lightweight aluminum alloy frame, sealed bearings throughout, dice valve caps, wheelie pegs, and a built in bottle opener in the seat.

FEATURES

• Vans Edition retro 6061 aluminum Big Ripper frame with floval tubing, looptail rear end, American bottom bracket and classic PK Ripper wishbone plate
• Limited Edition & Individually Numbered on the Inside of the Rear Dropout
• Full Cr-Mo “Off the Wall” Landing Gear forks
• Cr-Mo Power Wing cruiser bars
• Double-wall rims with sealed-bearing and high-flange hubs
• SE 3-piece V-Ridge cranks with alloy SE sprocket
• Vans x Cult Grips with rubber SE end plugs
• Vans x Cult 29″ x 2.1″ Tires
• Vans x SE Bikes Flyer Seat with SE bottle opener
• Vans Checkerboard Padset, 66 Dice Valve Caps, & SE Wheelie Pegs included
• 32 pounds

SPECIFICATIONS

• FRAME: Vans Edition, 6061 Aluminum Floval Tubing, Looptail Rear End, 68mm American Bottom Bracket, Wide Rear Stays, Retro Dropouts, Limited Edition & Individually Numbered on the Inside of the Rear Dropout
• FORK: “Off the Wall” Landing Gear, Full Cr-Mo
• CRANKSET: SE V-Ridge 3-pc Cr-Mo Cranks, 175mm, Sealed American Bottom Bracket, 160mm Spindle Length, 19mm Spindle Diameter, 36T Alloy SE Racing Sprocket
• PEDALS: X-Pedo Low-profile Platform w/ Removable Pins
• CHAIN: KMC S1
• WHEELSET: Sealed Bearing 36H High-Flange Alloy Flip Flop Hubs w/ Double-wall Rims, 16T Freewheel, Stainless Spokes
• TIRES: Vans x Cult Tires, All Over Tread Design, Vans Waffle Sole Pattern, 29″ x 2.1″ Front & Rear
• BRAKESET: Tektro 855AL V-Brake, Slick Cable
• BRAKE LEVERS: Tektro 316A, 2-Finger Alloy
• HEADSET: Tange 1-1/8″ Threadless
• HANDLEBAR: Power Wing Cr-Mo Cruiser Bar, 28″ x 7″, 10 Backsweep, 1 Upsweep
• STEM: Retro Alloy Top-Load w/ Engraved SE Logo on Top & Sides, 55mm Reach
• GRIPS: Vans x Cult Grips, Waffle Sole Pattern, Made in USA
• SEAT: Vans x SE Bikes Flyer Seat w/ Custom SE Bottle Opener Brace
• SEATPOST: Micro-Adjust Alloy, 27.2mm
• SEAT CLAMP: Alloy, 31.8mm Inner Diameter
• ACCESSORIES: Vans Checkerboard Padset, ’66 Dice Valve Caps, SE Wheelie Pegs
• WEIGHT: 32 lbs / 14.51 kgs

GEOMETRY

• TOP TUBE, ACTUAL: 23.6″
• SEAT TUBE, CENTER TO TOP: 16.9″
• SEAT TUBE ANGLE: 71
• HEAD TUBE ANGLE: 71
• CHAINSTAY LENGTH: 18.25″
• WHEELBASE: 44″
• BOTTOM BRACKET HEIGHT: 12.25″
• STANDOVER: 30.75″
• SUGGESTED RIDER SIZE: 5’5″+ (165cm+)
• STEM: 55mm
• HANDLEBAR WIDTH: 29″
• CRANK: 175mm
• WHEEL SIZE: 29″
• SEAT POST DIAMETER: 27.2mm